Technical data HF-components


Construction
TEO = open, vacuum varnished
TEV = potted in a housing


Temperature class
T40/B, on request insulation class F (155°C) for type TEO


Protective class
IP00 (for mounting in an appliance)


Phases
1


Frequency
according to specification or table


Safety standards VDE/SEV
EN 61558-2-17


Safety standards UL/CSA
on request UL/CSA materials or UL-approval


Bobbin
Material: Duroplast GV or Polyterephthalat GV


Insulants
Polyester class B = 130°C with UL approval UL 94 V0


Copper wire
Polyurethane mod. class F = 155°C with UL approval
min. 0,04 mm
Parallel winding of wires is possible


Cu-foil
min. 0,05 mm


HF-Litz
conform to DIN with satin


Screening
made of Cu-foil, reduces the max. power


Cores
made of N27, N67, N87 or similiar materials


Terminals
Pins
Free wires
Stranded flexible wires


Mounting
by plugging into the printed circuit board (Print)


Voltages
min. 0 V
max. depends on the type size


Tappings
are possible


Current
min. 0 A
max. depends on the type size


© 2018 Tauscher Transformatoren GmbH                                                                                                                                   Impressum / Privacy Policy